Installation
Our Installation Process
01
Prep
- Gather required tools and materials.
- Prep the walls as you normally would
- Our kits can overlay over existing tile or go directly to the studs.
- Trim the MCB, if necessary
02
Install
- Use appropriate techniques to securely install the shower base, including mosaic tiles if applicable
- Apply approved construction adhesive to the back wall panel and after utilizing the correct application method, hold it in place for 30 seconds to ensure proper suction
- Install first side panel and use a diamond-hole saw to make the necessary adjustments to the MCB
- Install second side panel ensuring a snug fit
03
Seal
- Seal Joints and Corners: Apply recommended silicone sealant to seal joints, corners, and the shower base, ensuring water-tightness
- Add Finishing Trim: If required, add finishing metal-edge trim to both side panels for a polished look
04
Dry
- Let the installation dry for at least 3 hours before use, with full readiness achieved after 24 hours.